Turbopump

Cutaway of the turbopump used in the F1 rocket engine (Saturn V first stage). This is a centrifugal/radial design, which is nearly ubiquitous in turbopumps.

A turbopump (portmanteau of turbine pump) is an assembly consisting of a liquid pump driven by a gas turbine, connected via a shaft (and occasionally gears as well). They were initially developed in the US and Germany in the 1930s and 1940s. While other use cases can exist, the primary purpose of turbopumps is to dramatically raise the pressure of liquid propellants and feed them to the combustion chamber of a rocket engine. While they have considerably higher design complexity, turbopump fed systems scale much more favorably in large rockets than pressure-fed systems, which require increasingly thick and heavy tanks to supply high chamber pressures in the engines.

Part of an axial turbopump designed and built for the M-1 rocket engine. Axial designs are rare in turbopumps aside from a few liquid hydrogen pumps.

Two types of pumps have been used in turbopumps: most common are centrifugal pumps, where the pumping is done by throwing fluid outward at high speed, while much rarer are axial-flow pumps, where alternating rotating and static blades progressively raise the pressure of a fluid. Centrifugal designs give high head (pressure increase) but modest flow rates, while axial flow rates give high flow rates (advantageous for low density fluids, i.e. liquid hydrogen) but modest head, and so usually need many stages in series.

A common turbopump arrangement. Note that there are many possible, and common, variations to this arrangement including mounting the turbine between the pumps, having a multistage turbine, separating the fuel pump and ox pumps onto dual shafts, etc.