Transperth A-series train

Transperth A-series
A-series set 09 between Bassendean and Ashfield
Refurbished interior
In service1990–present
ManufacturersABB/Adtranz and Walkers
Built atMaryborough, Queensland
ReplacedADK/ADB and ADL/ADC class diesel railcars
Constructed1990-1999
Number built96 carriages (48 sets)
Number in service96 carriages (48 sets)
SuccessorB-series, C-series
Formation2-car sets
Fleet numbers01-48
     AEA: 201-248
     AEB: 301-348
Capacity148 seated, 164 standing (2-car set as delivered)
OperatorTransperth
DepotClaisebrook
Lines served
Specifications
Car body constructionStainless steel
Train length48,422 mm (158 ft 10+3⁄8 in) (over coupler faces)
Car length24,211 mm (79 ft 5+3⁄16 in) (over coupler faces)
Width2.89 m (9 ft 5+3⁄4 in)
Height
  • 3,699 mm (12 ft 1+5⁄8 in) (excluding roof equipment)
  • 3,922 mm (12 ft 10+7⁄16 in) (including roof equipment)
DoorsPneumatic sliding pocket, 2 per side of car
Wheelbase2,500 mm (8 ft 2+7⁄16 in)
Maximum speed
  • 120 km/h (75 mph) (design)
  • 110 km/h (68 mph) (service)
Weight94 t (93 long tons; 104 short tons)
Traction systemABB GTO–phase-fired controller
Traction motors6 × ABB 195 kW (261 hp) DC motor
Power output1.17 MW (1,569 hp)
Acceleration0.8 m/s2 (2.6 ft/s2)
Deceleration1.12 m/s2 (3.7 ft/s2)
Electric system25 kV 50 Hz AC (nominal) from overhead catenary
Current collectionPantograph
UIC classificationBo′Bo′+Bo′2′
BogiesFabricated steel
Braking systemsElectro-pneumatic braking (Davies and Metcalfe)
Safety systemAnsaldo STS L10000 ATP
Coupling system
SeatingLongitudinal
Track gauge1,067 mm (3 ft 6 in)
Notes/references
Sourced from except where noted

The A-series trains are a class of electric multiple unit built by Walkers Limited in Maryborough, Queensland for Transperth between 1991 and 1999. When introduced in 1991, the A-series trains became the first electric passenger trains to operate in Western Australia and until 2004, were the only type of train in use on the Perth suburban rail network.