Orbital Maneuvering System
The underside of a left OMS/RCS pod on Space Shuttle Endeavour | |
| Manufacturer | Aerojet |
|---|---|
| Country of origin | United States |
| Used on | Space Shuttle/Orion European Service Module |
| General characteristics | |
| Length | 21.8 ft (6.6 m) |
| Width |
|
| Launch history | |
| Status | Pod: Retired Engines: Active |
| Total launches | Space Shuttle: 135 Orion: 2 |
| Successes (stage only) | Space Shuttle: 134 Orion: 2 |
| Lower stage failed | 1 (STS-51-L) |
| First flight | April 12, 1981 (STS-1) |
| Last flight |
|
| OMS Engine | |
| Powered by | 1 × AJ10-190 |
| Maximum thrust | 26.7 kN (6,000 lbf) |
| Specific impulse | 316 s (3.10 km/s) |
| Burn time |
|
| Propellant | MMH/MON-3 |
| Aft Primary RCS | |
| Powered by | Primary RCS engines |
| Maximum thrust | 3.87 kN (870 lbf) |
| Burn time |
|
| Propellant | MMH/MON-3 |
| Aft Vernier RCS | |
| Powered by | Vernier RCS engines |
| Maximum thrust | 106 N (24 lbf) |
| Burn time | Up to 125 seconds (each burn) |
| Propellant | MMH/MON-3 |
The Orbital Maneuvering System (OMS) is a system of hypergolic liquid-propellant rocket engines used on the Space Shuttle and the Orion spacecraft. Designed and manufactured in the United States by Aerojet, the system allowed the orbiter to perform various orbital maneuvers according to requirements of each mission profile: orbital injection after main engine cutoff, orbital corrections during flight, and the final deorbit burn for reentry. From STS-90 onwards the OMS were typically ignited part-way into the Shuttle's ascent for a few minutes to aid acceleration to orbital insertion. Notable exceptions were particularly high-altitude missions such as those supporting the Hubble Space Telescope (STS-31) or those with unusually heavy payloads such as Chandra (STS-93). An OMS dump burn also occurred on STS-51-F, as part of the Abort to Orbit procedure.