South African Class 7A 4-8-0

CGR 7th Class 4-8-0 1896
Sudan Railways Dongola Class
South African Class 7A & 7AS 4-8-0
Ex CGR (Eastern System) 7th Class no. 726
SAR Class 7A no. 1009 with modified Type ZC tender
Type and origin
♠ – Original locomotive, as built
♥ – Locomotive equipped with superheating
Power typeSteam
DesignerCape Government Railways
(H.M. Beatty)
BuilderSharp, Stewart and Company
Dübs and Company
Neilson and Company
Serial numberSharp, Stewart 4145–4152, 4363
Dübs 3355–3362, 3641–3652, 3976
Neilson 4920–4931, 5160–5163, 5232–5234, 5280–5281, 5345–5347
ModelCGR 7th Class
Build date1896–1898, 1901
Total produced46
Specifications
Configuration:
​
 • Whyte4-8-0 (Mastodon)
 • UIC♠ 2'Dn2 – ♥ 2'Dh2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28+1⁄2 in (724 mm)
Coupled dia.42+3⁄4 in (1,086 mm)
Tender wheels33+1⁄2 in (851 mm) as built
34 in (864 mm) retyred
Wheelbase46 ft 2 in (14,072 mm) ​
 • Engine21 ft 3+1⁄2 in (6,490 mm)
 • Leading5 ft 3 in (1,600 mm)
 • Coupled12 ft (3,658 mm)
 • Tender16 ft 1 in (4,902 mm)
 • Tender bogie4 ft 7 in (1,397 mm)
Length:
​
 • Over couplers53 ft 5+1⁄4 in (16,288 mm)
Height12 ft 10 in (3,912 mm)
Frame typePlate
Axle load♠ 9 LT (9,144 kg)
♥ 9 LT 14 cwt (9,856 kg) ​
 • Leading♠ 10 LT 14 cwt (10,870 kg)
♥ 11 LT 2 cwt (11,280 kg)
 • 1st coupled♠ 9 LT (9,144 kg)
♥ 9 LT 8 cwt (9,551 kg)
 • 2nd coupled♠ 9 LT (9,144 kg)
♥ 9 LT 14 cwt (9,856 kg)
 • 3rd coupled♠ 8 LT 18 cwt (9,043 kg)
♥ 9 LT 10 cwt (9,652 kg)
 • 4th coupled♠ 8 LT 18 cwt (9,043 kg)
♥ 9 LT 8 cwt (9,551 kg)
 • Tender axle8 LT 10 cwt 2 qtr (8,662 kg) av.
Adhesive weight♠ 35 LT 16 cwt (36,370 kg)
♥ 37 LT 16 cwt (38,410 kg)
Loco weight♠ 46 LT 10 cwt (47,250 kg)
♥ 49 LT 2 cwt (49,890 kg)
Tender weight34 LT 2 cwt (34,650 kg)
Total weight♠ 80 LT 12 cwt (81,890 kg)
♥ 83 LT 4 cwt (84,540 kg)
Tender typeZC (2-axle bogies)
ZA, ZB, ZC, ZE permitted
Fuel typeCoal
Fuel capacity5 LT 10 cwt (5.6 t)
Water cap.2,600 imp gal (11,800 L)
Firebox:​
 • TypeRound-top
 • Grate area♠ 17.5 sq ft (1.63 m2)
♥ 18 sq ft (1.7 m2)
Boiler:
​
 • Pitch♠ 6 ft 8 in (2,032 mm) pitch
♥ 6 ft 10 in (2,083 mm)
 • Diameter♠ 4 ft 4 in (1,321 mm)
♥ 4 ft 6 in (1,372 mm)
 • Tube plates♠♥ 10 ft 9 in (3,277 mm)
 • Small tubes♠ 185: 1+7⁄8 in (48 mm)
♥ 100: 1+7⁄8 in (48 mm)
 • Large tubes♥ 18: 5+1⁄2 in (140 mm)
Boiler pressure♠ 160 psi (1,103 kPa)
170 psi (1,172 kPa) adjusted
♥ 180 psi (1,241 kPa)
Safety valveRamsbottom
Heating surface:​
 • Firebox♠ 102 sq ft (9.5 m2)
♥ 113 sq ft (10.5 m2)
 • Tubes♠ 976 sq ft (90.7 m2)
♥ 806 sq ft (74.9 m2)
 • Total surface♠ 1,078 sq ft (100.1 m2)
♥ 919 sq ft (85.4 m2)
Superheater:
​
 • Heating area♥ 206 sq ft (19.1 m2)
CylindersTwo
Cylinder size17 in (432 mm) bore
23 in (584 mm) stroke
Valve gearStephenson
Valve type♠ Slide – ♥ Piston
CouplersJohnston link-and-pin
AAR knuckle (1930s)
Performance figures
Tractive effort♠ 18,660 lbf (83.0 kN) @ 75%
♠ 19,810 lbf (88.1 kN) @ 75% adjusted
♥ 22,240 lbf (98.9 kN) @ 75%
Factor of adh.4.3
Career
OperatorsCape Government Railways
Bechuanaland Railway
Imperial Military Railways
Imvani-Indwe Railway
Sudan Military Railway
South African Railways
Zambesi Saw Mills
ClassCGR 7th Class, SAR Class 7A
Number in class46 CGR, 44 SAR
NumbersCGR 347–350, 385–398, 718–744, 758
BR 4–7
IMR C522, C523 & C525-C527
Imvani-Indwe: Named
SAR 988–1031
Sudan 26–33
Delivered1896–1901
First run1896
Withdrawn1972
The leading coupled axle had flangeless wheels

The South African Railways Class 7A 4-8-0 of 1896 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

Between 1896 and 1901, the Cape Government Railways placed a second batch of altogether 46 7th Class steam locomotives with a 4-8-0 Mastodon wheel arrangement in service on its Midland and Eastern Systems. In 1912, when all but two of them were assimilated into the South African Railways, they were renumbered and designated Class 7A.

In 1897 and 1898, during Kitchener's military campaign in Sudan, eight Cape 7th Class locomotives were built to the same design for the Soudan Military Railway.