Nissan A engine

Nissan A engine
Nissan A10 engine (1969)
Overview
ManufacturerNissan
Production1967–2009
Layout
ConfigurationInline-four cylinder
Displacement
  • 1.0 L (988 cc)
  • 1.2 L (1,171 cc)
  • 1.2 L (1,237 cc)
  • 1.3 L (1,270 cc)
  • 1.3 L (1,288 cc)
  • 1.4 L (1,397 cc)
  • 1.5 L (1,487 cc)
Cylinder bore
  • 73 mm (2.87 in)
  • 75 mm (2.95 in)
  • 76 mm (2.99 in)
Piston stroke
  • 59 mm (2.32 in)
  • 70 mm (2.76 in)
  • 77 mm (3.03 in)
  • 82 mm (3.23 in)
ValvetrainOHV, 2 valves per cylinder
Combustion
Fuel systemCarburettor
Fuel typeGasoline
Cooling systemWater-cooled
Output
Power outputFrom 59 PS (43 kW; 58 hp) to 92 PS (68 kW; 91 hp)
Torque outputFrom 8.3 kg⋅m (81 N⋅m; 60 lb⋅ft)
Chronology
PredecessorNissan C engine / Nissan E engine (OHV)
SuccessorNissan E engine (OHC)

The Nissan A series of internal combustion gasoline engines have been used in Datsun and Nissan brand vehicles. Displacements of this four-stroke engine family ranged from 1.0-liter to 1.5-liter and have been produced from 1967 until 2009. It is a small-displacement four-cylinder straight engine. It uses a lightweight cast iron block and an aluminum cylinder head, with overhead valves actuated by pushrods.

The Nissan A engine design is a refined, quiet and durable gasoline engine. It appears to be a modern replacement of the earlier iron-headed Nissan C and Nissan E engines and is of similar dimensions. The 1960s A series was an all-new design from newly acquired Aichi Kokuki, and a departure from Nissan's BMC B-Series engine derived designs of the 1950s (Nissan was a licensee of Austin Motor Company technology). A major improvement over the BMC-based designs was locating the camshaft on the right side of the engine rather than the left where the inlet and exhaust ports were located. This meant that the pushrods no longer intruded on the ports, allowing for eight individual ports instead of the original five, and the new engine used an oil pump mounted to the right side of the block rather than behind the rear of the camshaft. As production continued, 1974 and newer A-series engines had different block castings, with relocated motor mount bosses. The A-series engine was also used by India's Premier Automobiles Limited.