Superheterodyne receiver
The superheterodyne receiver, commonly called the superhet, is a radio receiver that uses heterodyning to convert incoming radio-frequency (RF) signals to a fixed intermediate frequency (IF). The signal is then amplified and filtered at that fixed frequency. This arrangement separates tuning from most of the gain and filtering: the RF circuits make an initial, relatively broad selection of the desired station, while the IF stages provide most of the amplification and the selectivity needed to separate it from adjacent stations.
The design became important during the rapid growth of broadcast radio in the 1920s. As amplitude modulation (AM) stations multiplied, receivers had to handle crowded bands and signals that ranged from strong local stations to weak distant ones. Many earlier sets required several tuning controls to be adjusted together, and their performance varied widely. The superheterodyne offered a more practical path to stable gain, sharper selectivity, and simpler operation, especially as vacuum tubes (valves) improved and became cheaper.
The principle had been developed earlier, but the superheterodyne did not become widely used until the mid-1920s, when receiver designs and vacuum tubes improved enough for practical mass production. Patent control and licensing also played a role. The Radio Corporation of America (RCA) and associated companies held key rights and influenced which receiver types could be manufactured. By the early 1930s, as licensing issues eased, the superheterodyne largely replaced earlier receivers.