G class Melbourne tram

G class
G class tram 7006 on Elizabeth Street in July 2026
Interior seats in a G class tram mockup
ManufacturerAlstom
Built atDandenong
Family nameFlexity 2
Constructed2024–present
Entered service30 July 2026
Number under construction93
Number built7
Number in service1
Fleet numbers7001–7100
Capacity150
OperatorYarra Trams
DepotsMaidstone
Essendon
Specifications
Train length~25 m (82 ft 0 in)
Low-floor100% - though the low floor area is sloped in places and there are steps up to some of the seats
Doors4
Articulated sections3 (2 articulations)
Maximum speed80 km/h (50 mph)
Traction motors4 × Škoda FCX 105 kW (141 hp)
Power output420 kW (560 hp)
Electric systems600 V DC (nominal) from overhead catenary
Current collectionPantograph
UIC classificationBo′+2′+Bo′
Track gauge1,435 mm (4 ft 8+1⁄2 in) standard gauge

The G class Melbourne tram is a three-section articulated tram. The trams are low-floor, replacing part of the current fleet of high-floor Z and A class trams. The design is based on the Flexity 2 but with pivoting outer bogies. These trams were introduced onto the Melbourne tram network on 30 July 2026.

The trams were designed, built and maintained by Alstom at its Dandenong factory. Manufacturing of the fleet began in late 2023. The project also included a new maintenance and stabling facility in Maidstone, where up to 40 trams of the new fleet would be stored following construction.

The initial contract was for 100 new trams, which is the largest domestic order in Australian history by value, and included the requirement for Alstom to maintain the vehicles for 15 years. The trams are designed to carry 150 passengers and are 25 metres (82 ft 0 in) long.

The first of the 50 trams of this fleet will initially roll out on routes 57, 59 and 82. As of 2023, these routes are operated out of Essendon depot. The other half of the 50 trams of this fleet will also expand to routes 12, 48 and 58.