Five-bar linkage

Five bar mechanism with two input angles theta 1 and theta 2
Geared Five Bar Mechanism, where the two disks represent meshing gears which are fixed to their corresponding links.
2 DOF five-bar mechanism with two input angles θ1 and θ2 and a geared mechanism, where the two disks represent meshing gears which are fixed to their corresponding links

In kinematics, a five-bar linkage is a mechanism with two degrees of freedom that is constructed from five links that are connected together in a closed chain. All links are connected to each other by five joints in series forming a loop. One of the links is the ground or base. This configuration is also called a pantograph, however, it is not to be confused with the parallelogram-copying linkage pantograph.

The linkage can be a one-degree-of-freedom mechanism if two gears are attached to two links and are meshed together, forming a geared five-bar mechanism.

Animation of a five-bar mechanism angle sweep over its workspace, done on MATLAB. The red arrow indicates the velocity direction of the end-effector due to unit speed input at the left motor and its length is proportional to its speed.