Victorian Railways E type carriage

E Type Carriage
Side view of 25BE in preservation
E type carriage 25BE restored by Steamrail Victoria in 2018
Interior of an AE carriage compartment
Interior of a restored AE coded first class carriage
ManufacturersVictorian Railways, South Australian Railways
AssemblyMelbourne, Australia and Adelaide, South Australia
Built atNewport Workshops, Islington Railway Workshops
Operatorvarious heritage operators
Specifications
Car body constructionTimber
Car length71 ft 0 in (21.64 m) over body; 74 ft 1+1⁄4 in (22.59 m) over pulling lines; 73 ft 8+1⁄4 in (22.46 m) when coupled
Width9 ft 6 in (2.90 m)
Height13 ft 8+1⁄4 in (4.17 m)
Doors4 swing doors at corners
Maximum speed70 mph (113 km/h) in service; 50 mph (80 km/h) in preservation
Power supplyAxle-mounted generators
HVACSome cars fitted with Stone's Air Conditioning units.
Bogies53 ft 10 in (16.41 m) centres; 10 ft (3.05 m) wheelbase each; 63 ft 10 in (19.46 m) total wheelbase
8 ft 9 in (2.67 m) wheelbase each; 61 ft 10 in (18.85 m) total wheelbase
Braking systemWestinghouse air brakes
Coupling systemScrew couplers, later automatic couplers
SeatingCompartments
Track gauge5 ft 3 in (1,600 mm)
Notes/references
This table is the generic layout; tables further down the page cover specific sub-types

The E type carriages were wooden express passenger carriages used on the railways of Victoria, Australia. Originally introduced by Victorian Railways Chairman of Commissioners Thomas James Tait for the interstate service between Melbourne, Sydney and Adelaide, these Canadian-inspired carriages remained in regular service for 85 years over the entire Victorian network.