Cotter Dam
| Cotter Dam | |
|---|---|
Downriver from the new dam wall, in 2013 | |
Cotter Dam Location of the 2013 gravity dam wall in the ACT | |
Interactive map of Cotter Dam | |
| Location | Australian Capital Territory, Australia |
| Coordinates | 35°19′13″S 148°56′23″E / 35.320203°S 148.939698°E |
| Purpose | Water supply |
| Status | Operational |
| Construction began |
|
| Opening date |
|
| Built by |
|
| Owner | Icon Water |
| Dam and spillways | |
| Type of dam | Gravity dam |
| Impounds | Cotter River |
| Height | 87 m (285 ft) |
| Length | 330 m (1,080 ft) |
| Elevation at crest | 550.8 m (1,807 ft) AHD |
| Dam volume | 380×103 m3 (13×106 cu ft) |
| Spillways | 1 |
| Spillway type | Uncontrolled |
| Spillway capacity | 5,670 m3/s (200,000 cu ft/s) |
| Reservoir | |
| Creates | Cotter Reservoir |
| Total capacity | 78 GL (63,000 acre⋅ft) |
| Active capacity | 76.2 GL (61,800 acre⋅ft) |
| Catchment area | 482 km2 (186 sq mi) |
| Surface area | 285 ha (700 acres) |
| Normal elevation | 511 m (1,677 ft) AHD |
| Website iconwater.com.au/cotterdam | |
The Cotter Dam is a concrete gravity and rockfill embankment dam across the Cotter River, located in the Australian Capital Territory, Australia. Both the dam and river are named after early settler in the area Garrett Cotter. The impounded Cotter Reservoir is a supply source of potable water for the city of Canberra and its environs.
The original dam, sometimes referred to as the Old Cotter Dam, was a gravity dam, completed in 1915. Several minor expansions occurred over subsequent decades. In 2013, a major reconstruction was completed when two embankment saddle dams were added, the dam wall was raised and relocated, and the original dam wall inundated within the expanded reservoir.