BR Standard Class 3 2-6-2T

BR Standard Class 3 2-6-2T
BR No. 82000 in 1952.
Type and origin
Power typeSteam
DesignerR. A. Riddles
BuilderSwindon Works
Build dateApril 1952 – August 1955
Total produced45
Specifications
Configuration:
​
 • Whyte2-6-2T
 • UIC1′C1′ h2t
Gauge4 ft 8+1⁄2 in (1,435 mm)
Leading dia.3 ft 0 in (0.914 m)
Driver dia.5 ft 3 in (1.600 m)
Trailing dia.3 ft 0 in (0.914 m)
Length40 ft 10+1⁄2 in (12.46 m)
Width8 ft 6 in (2.59 m)
Height13 ft 0 in (3.96 m)
Axle load16.30 long tons (16.56 t; 18.26 short tons)
Adhesive weight48.75 long tons (49.53 t; 54.60 short tons)
Loco weight74.05 long tons (75.24 t; 82.94 short tons)
Fuel typeCoal
Fuel capacity3.00 long tons (3.05 t; 3.36 short tons)
Water cap.1,500 imp gal (6,800 L; 1,800 US gal)
Firebox:​
 • Grate area20.35 sq ft (1.891 m2)
BoilerBR6
Boiler pressure200 psi (1.38 MPa)
Heating surface:​
 • Firebox118.42 sq ft (11.002 m2)
 • Tubes and flues923.54 sq ft (85.800 m2)
Superheater:
​
 • Heating area184.50 sq ft (17.141 m2)
CylindersTwo, outside
Cylinder size17.5 in × 26 in (444 mm × 660 mm)
Performance figures
Tractive effort21,490 lbf (95.6 kN)
Factor of adh.5.08
Career
OperatorsBritish Railways
Power class3MT
Numbers82000–82044
Axle load classRoute availability 4
BR (WR): yellow
WithdrawnFebruary 1964 – July 1967
DispositionAll original locomotives scrapped; one new-build under construction

The BR Standard Class 3 2-6-2T was a class of steam locomotive designed by Robert Riddles for British Railways. It was essentially a hybrid design, the chassis being closely based on and sharing a number of parts with the LMS Ivatt Class 4, and having a boiler derived from a GWR No.2 boiler as fitted to the GWR Large Prairie 2-6-2T and 5600 Class 0-6-2T tank engines.